Embroidering preparation
Moving the hoop to the back
To facilitate changing the bobbin, it is recommended to move the hoop to the back before threading. This
makes it easier to open the bobbin cover.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Move the hoop to the back».
> Thread the bobbin thread (see page 45).
P
> Push the button «Start/Stop» to move the embroidery hoop back to the last position. If necessary, pull
the upper thread back.
Moving the module for the sewing mode
The embroidery module can be positioned so that any sewing projects can be carried out even if the module
is connected.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Remove the hoop.
> Touch the icon «Move the module for the sewing mode».
P
> Touch the icon «Home».
> Touch the icon «Sewing mode».
Grid on/off
When the center of the hoop and the grid are displayed, the embroidery motif can be positioned more
exactly.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Grid on/off» to display the center of the hoop on the display.
> Touch the icon «Grid on/off» again to display the grid.
> Touch the icon «Grid on/off» again so that the center of the hoop and the grid disappear.
146