Changing The Presser Foot; Selecting The Presser Foot In The User Interface - Bernina 590 User Manual

Sewing preparation

Changing the presser foot

> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up (1).
> Remove the presser foot (2).
1
2
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.

Selecting the presser foot in the user interface

After having replaced the presser foot, it can be checked whether it suits for the selected stitch pattern.
Moreover, optional presser feet, which are also available for the respective stitch pattern, are displayed.
> Switch the machine on.
> Select the stitch pattern.
> Touch the icon «Presser foot display/Presser foot selection».
> Touch the icon «Optional presser feet» to display all suitable presser feet for the selected stitch pattern.
36