Application Of The Bernina Dual Feed - Bernina 590 User Manual

• Velvet, normally sewn with the grain.
• Toweling.
• Jersey, especially when sewing it crosswise to knit.
• Fake fur or coated fake fur.
• Fleece-types of fabrics.
• Batted fabrics.
• Stripes and checks.
• Curtain fabrics with pattern repeats.
«Sticky» fabrics are:
• Imitation leather, coated fabrics (optimally with optional accessory Zigzag foot # 52D with sliding sole).

Application of the BERNINA Dual Feed

Only use presser feet with a cut-out at the center back and the labeling «D». Additional presser feet with
the labeling «D» are listed in the enclosed accessory catalog.
Activate Dual Feed
> Raise the presser foot.
> Attach a presser foot with the designation «D».
> Pull the dual feed down until it engages.
Deactivate Dual Feed
> Raise the presser foot.
> Hold the dual feed by the handle with two fingers, pull it down and then push it away from you and let it
slide slowly upwards.
Creative sewing
71