Table of Contents
Advertisement
TEMPEST DRAGON 15cc ARF
4.
5.
6.
7.
26
Epoxy
Instruction Manual.
VERTICAL STABILIZER
INSTALLATION
Slide the vertical stabilizer into the slot
in the top of the fuselage. he rear edge
of the stabilizer should be lush with the
rear edge of the fuselage and the lower
rudder hinge should engage the precut
hinge slot in the lower fuselage. he bot-
tom edge of the stabilizer should also be
irmly pushed against the top of the hori-
zontal stabilizer.
1.
While holding the vertical stabilizer
irmly in place, use a pen and draw a
line on each side of the vertical stabilizer
where it meets the top of the fuselage.
2.
Remove the stabilizer. Using a modeling
knife, remove the covering from below
the lines you drew.
Advertisement
Table of Contents
