Seagull Models TEMPEST DRAGON 15cc ARF Assembly Manual page 23

6.
7.
INSTALLING THE SPINNER
Install the spinner backplate, propeller
and spinner cone.
he propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
1.
M3x10mm
2.
INSTALL HINGE FOR STABILIZER
AND ELEVATOR
Please study images below.
1.
2.
2.
3.
C/A Hinge
3.
23