11
SERVICE WORK ON THE CHASSIS
11.20
Removing the seat
11.21
Mounting the seat
11.22
Removing the air filter box cover
–
Remove screws
S01230-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
S01231-01
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
S01231-11
–
Mount and tighten screws
Guideline
Remaining screws, chassis
S01230-10
(All SX‑F standard models, SX‑F Factory Edition)
Condition
The air filter box cover is secured.
–
Remove screw
S01232-10
1
.
1
.
1
.
M6
10 Nm (7.4 lbf ft)
50