Removing The Seat; Mounting The Seat; Removing The Activated Carbon Filter; Installing The Activated Carbon Filter - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.18
12.19
12.20
12.21
68

Removing the seat

A00740-10

Mounting the seat

A00739-10

Removing the activated carbon filter

A00741-10

Installing the activated carbon filter

A00741-10
–
1
Pull on loop . At the same time, lift the seat at the rear and
take it off.
–
Position the seat between the two front fuel tanks.
–
1
Insert locking pin into the lock housing and push down the
rear of the seat until the locking pin engages with a click.
–
Check that the seat is correctly mounted.
–
1
Remove screws .
–
2
Pull off hoses .
–
Take out the activated carbon filter.
–
Position the activated carbon filter.
–
Mount and tighten screws
–
2
Mount the hoses .
1
.