KTM 250 SX-F 2017 Owner's Manual page 68

11 SERVICE WORK ON THE CHASSIS
–
Now inject the liquid into the system until it emerges from drill hole
master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
–
Tighten the bleeder screw and remove the bleeding syringe with the hose.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
–
Position the cover with the membrane. Mount and tighten the screws.
F00166-10
6
4 mm (0.16 in)
66
of the