Recommended Work - KTM 250 SX-F 2017 Owner's Manual

Hide thumbs Also See for 250 SX-F 2017:
Table of Contents

Advertisement

9
SERVICE SCHEDULE
One-time interval
Periodic interval
9.3

Recommended work

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Service the fork.
Service the shock absorber.
Change the fuel filter.
Perform minor engine service including removing and installing engine. (Change spark plug and
spark plug connector. Change piston, check and measure cylinder; check cylinder head. Check
camshaft and cam lever. Check timing assembly. Change intake flange.)
Perform major engine service including removing and installing engine. (Change valves, valve
springs, valve spring seats and valve spring retainers. Change the connecting rod, conrod bearing,
and crank pin. Check the transmission and shift mechanism. Check the oil pressure regulator valve.
Change the suction pump. Check the force pump and lubrication system. Change timing chain.
Change all engine bearings. Change freewheel.)
One-time interval
Periodic interval
(
p. 65)
(
p. 46)
Every 100 operating hours
Every 50 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
28
Annually

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

250 xc-f 2017250 sx-f factory edition 2017

Table of Contents