KTM 250 SX-F 2017 Owner's Manual page 86

14 ELECTRICAL SYSTEM
Main work
(All SX‑F standard models)
–
Pull starter relay
F00136-10
–
Take off protection caps
–
Remove faulty main fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
F00135-10
(XC‑F US, SX‑F Factory Edition)
–
Pull starter relay
F00161-10
–
Take off protection caps
–
Remove faulty main fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
F00162-10
Finishing work
–
Mount the seat. (
1
from the holder.
2
.
3
.
Info
You can recognize a defective fuse by a burned-out fuse wire
4
A spare fuse is located in the starter relay.
p. 106)
Tip
Insert a spare fuse so that it is available if needed.
1
from the holder.
2
.
3 .
Info
You can recognize a defective fuse by a burned-out fuse wire
A spare fuse 4 is located in the starter relay.
p. 106)
Tip
Insert a spare fuse so that it is available if needed.
p. 50)
84
A
.
A
.