11
SERVICE WORK ON THE CHASSIS
11.1
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
1
0 0 1
11.3
Bleeding the fork legs
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
(All SX‑F standard models, SX‑F Factory Edition)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
spindle.
402001-10
(XC‑F US)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
lean the motorcycle on it.
401943-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
H01182-12
Finishing work
–
Remove the motorcycle from the lift stand. (
Info
Remove the plug-in stand before starting on a trip.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
1
.
1
into the left side of the wheel
1
to the ground with your foot and
p. 40)
p. 40)
40