Light Oil Supply; General Supply Layout (Example) - Riello DB9 LSM C13 TC FB FS1 A0 T150 DUAL IGNITION Installation, Use And Maintenance Instructions

5.12

Light oil supply

Explosion danger due to fuel leaks in the pres-
ence of a flammable source.
Precautions: avoid knocking, attrition, sparks and
heat.
Make sure the fuel interception tap is closed be-
fore performing any operation on the burner.

5.12.1 General supply layout (example)

An example of the burner's hydraulic diagram is shown in Fig. 22.
20136295
Key (Fig. 22)
AD Air dumper
BP Pilot burner
C Anti-vibration joint
CL Oil collector
Cm Regulating cam
GF Gas filter
HPG High gas pressure regulator
LPG Low gas pressure regulator
MM Pressure gauge
MN Oil delivery pressure gauge
MR Oil return pressure gauge
N Nozzle
NL Oil lance
PA Minimum air pressure switch
PCV Gas pressure regulator
PGM Maximum gas pressure switch
PGm Minimum gas pressure switch
POM Maximum oil pressure switch
POm Minimum oil pressure switch
RG Gas butterfly valve
RP Oil return pressure regulator
20135492
Installation
The fuel supply line must be installed by qualified
personnel, in compliance with current standards
and laws.
WARNING
SM Servomotor
SRV Pressure limiting valve with outlet into the environment
VE Fan
VP Pilot solenoid valves
VPS Leak detection control device
VR Gas pressure regulator solenoid valve
VS Gas safety solenoid valve
VS1-2 Oil valve (safety)
VU Nozzle valve
20 GB
Fig. 22