Low Current Connections; Figure 8 23-Pin Ampseal Connector; Figure 9 35-Pin Ampseal Connector - Kohler Curtis F Series Manual

Return to TOC

LOW CURRENT CONNECTIONS

All logic and low power connections are through a single 23 or 35-pin AMPSEAL connector (mold
in the cover) utilizing gold-plated pins. The matching AMPSEAL receptacle's wire silos come sealed
by a membrane. Pierce the membrane by inserting the individual terminated wires. To maintain the
IP65 rating, use the proper wire gauge and insulation thickness. Seal any non-used wire positions
that have their silo-diaphragm pierced with the specific AMPSEAL sealing plug. Do not mix gold
and tin pin types.
• Figures 8 and 9 are the AMPSEAL receptacle (plug) housing. Note the molded-in silo numbering.
• Figures 10 and 11 illustrate the connection assignments (as the plug aligns with the controller).
• Tables 2 and 3 list the matching AMPSEAL vehicle-harness component part numbers.
Figure 8
23-Pin AMPSEAL
Connector
Figure 9
35-Pin AMPSEAL
Connector
2 — INSTALLATION AND WIRING
Curtis AC F2-A, F4-A, F6-A Motor Controllers – FOS 4.5 – April 2022
1
13
24
AMPSEAL 35 PIN Connector Harness-side view
8
1
9 15
23
16
12
23
35
pg. 9