Table of Contents
Advertisement
INSTALLATION
2
2.6 Mounting of the compact version
INFORMATION!
The signal converter is mounted directly on the measuring sensor. For installation of the
flowmeter, please observe the instructions in the supplied product documentation for the
measuring sensor.
2.7 Mounting the wall-mounted housing, remote version
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
2.7.1 Wall mounting
Figure 2-2: Mounting the wall-mounted housing
1 Prepare the holes with the aid of the mounting plate. For further information refer to
plate, wall-mounted version
2 Fasten the device securely to the wall with the mounting plate.
6
on page 8.
www.krohne.com
IFC 100
Mounting
07/2010 - 4000124104 - QS IFC 100 R04 en
Advertisement
Table of Contents
