INSTALLATION
2
2.10 Mounting the field housing, remote version
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
2.10.1 Wall mounting
Mounting the field version (F) on the wall
Figure 2-14: Wall mounting of the field housing
1 Prepare the holes with the aid of the mounting plate.
further information refer to
2 Use the mounting material and tools in compliance with the applicable occupational health
and safety directives.
3 Fasten the housing securely to the wall.
4 Screw the signal converter to the mounting plate with the nuts and washers.
Figure 2-15: Mounting multiple devices next to each other
a 600 mm / 23.6"
b 250 mm / 9.8"
14
Mounting plate of field housing
www.krohne.com
OPTISONIC 8300
on page 25.
03/2020 - 4008065101 - QS OPTISONIC 8300 R01 en