Table of Contents
Advertisement
IFC 100
3.9 Electrical connection of the outputs
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
3.9.1 Electrical connection of the outputs
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
Figure 3-14: Connection of outputs
1 Cable entry, remote version
2 Cable entry, compact version
3 Terminal S for shield
• Open the housing cover
• Push the prepared cables through the cable entries and connect the necessary conductors.
• Connect the shield.
• Close the housing cover.
INFORMATION!
Ensure that the housing gasket is properly fitted, clean and undamaged.
07/2010 - 4000124104 - QS IFC 100 R04 en
ELECTRICAL CONNECTIONS
www.krohne.com
3
27
Advertisement
Table of Contents
