Table of Contents
Advertisement
MFC 400
3.5 Mounting of the compact version
CAUTION!
Turning the housing of the compact version is not permitted.
INFORMATION!
The signal converter is mounted directly on the flow sensor. For installation of the flowmeter,
please observe the instructions in the supplied product documentation for the flow sensor.
3.6 Mounting the field housing, remote version
CAUTION!
Remarks for sanitary applications
To prevent contamination and dirt deposits behind the mounting plate, a cover plug must be
•
installed between the wall and the mounting plate.
Pipe mounting is not suitable for sanitary applications!
•
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
3.6.1 Pipe mounting
Figure 3-1: Pipe mounting of the field housing
1 Fix the signal converter to the pipe.
2 Fasten the signal converter using standard U-bolts and washers.
3 Tighten the nuts.
07/2016 - 4002075804 - MA MFC 400 R04 en
www.krohne.com
INSTALLATION
3
17
Advertisement
Table of Contents
