Connection Without Sjb 200 W (Only With Wall Mounting Version Sd 200 W); Grounding And Equipotential Bonding - KROHNE SD 200 W/R Handbook

SD 200 W/R
3.5 Connection without SJB 200 W (only with wall mounting version
SD 200 W)
Figure 3-3: Connection without SJB 200 W (only with wall mounting version SD 200 W)
1 Field device
2 SD 200 W
3 Power supply / Control room

3.6 Grounding and equipotential bonding

DANGER!
The housing must be connected to the equipotential bonding of the hazardous area. Please use
the ground connection facility (terminal FE) inside the housing.
The sensor cable shield must be connected to the connection facility (terminal S).
Consider the information mentioned in the supplementary instruction of the SMARTPAT sensor.
01/2020 - 4003851304 - MA SD 200 W/R R04 en
4 5 6 7
www.krohne.com
INSTALLATION
3
17