Table of Contents
Advertisement
5. Place two "A" firebricks on the firebox floor as shown. Place a third "A" firebrick against the rear wall as
shown in (Figure 17).
6. Place the "C" firebrick so that it sits beside the ash dump, against the lefthand side wall and the "A"
firebrick located directly behind the ash dump (Figure 17).
Figure 17: Floor brick in place.
7. Place a short narrow "F" brick against the front right side of the floor (Figure 18) followed by a longer "B"
brick in the center of the front row (Figure 19). Finish with the last "F" brick placed against the left side
front row (Figure 20). Note: There will be a leftover gap behind the ash dump.
Note: there will be one brick left over as a spare.
Figure 19: Long narrow center brick in front row.
ALT 4-LE 040523-28
Figure 18: Short, narrow brick installed in front row.
Figure 20: Final short narrow brick in front row.
25
100003978
Advertisement
Table of Contents
