Removing the Left-Side Panel
To remove the computer's left-side panel, perform the following procedure and refer to
Figure 4-10.
1. Turn off power to the computer, then disconnect the power cord and all external
cables connected to the computer.
2. Remove the right-side panel (refer to section 4.2.1.) and rear bezel (refer to section
4.2.3.), as viewed from the rear.
3. Remove the skirt from the left-side panel by pulling outward on the skirt until it is
free of the panel.
4. Remove the screw that secures the panel to the chassis.
5. Slide the panel toward you until it is free of the chassis.
6. Lift the panel away from the chassis.
Figure 4-10 Removing and Replacing the Left-Side Panel
Infinia™ Series Maintenance Manual --------------------------------------------------------- 4-130