ACME Super Dotline User Manual page 21

DMX Channel Mode
No DMX Status
View DMX Value
Connect Option
Select DMX Channel Mode, press ENTER.
Use UP/DOWN button to select between 17 CH, 27 CH, 99 CH, 108
CH, 168 CH, 8+100 CH, 8+160 CH and 21 CH, confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select No DMX Status, press ENTER.
Use UP/DOWN button to select one of the following status:
Blackout (Fixture blacks out if DMX signal stops)
Hold (The device continues to operate in the current mode with the last
active DMX values until the signal returns)
Manual (The device accepts the DMX value stored in the 'Manual Test'
menu)
Confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select View DMX Value, press ENTER.
Use UP/DOWN button to select the desired DMX channel, for which the
value is to be displayed.
To exit the menu, press MENU, or wait 30 seconds.
Select Connect Option, press ENTER.
Use UP/DOWN button to select Auto, DMX, Art-Net or sACN, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 20 -