ACME Super Dotline User Manual page 24

White Balance
LED Refresh Rate
Invert Pixel Order
Power Mode
CCT Calibration
Select White Balance, press ENTER.
Use UP/DOWN button to select Red, Green, Blue, Red1, Green1,
Blue1...... or Red12, Green12, Blue12, confirm your selection with
ENTER.
Use UP/DOWN button to select a value between 125 and 255, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select LED Refresh Rate, press ENTER.
Use UP/DOWN button to select 900Hz, 1000Hz, 1100Hz, 1200Hz,
1300Hz, 1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz, 6000Hz, 10000Hz,
15000Hz, 20000Hz or 25000Hz, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Invert Pixel Order, press ENTER.
Use UP/DOWN button to select No or Yes, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Power Mode, press ENTER.
Use UP/DOWN button to select Standard or Quiet, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select CCT Calibration, press ENTER.
Use UP/DOWN button to select Off or On, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 23 -