ACME Super Dotline User Manual page 23

Fixture Settings
Enter the control menu and select Fixture Settings, press ENTER. Use the UP/DOWN button
to select Tilt Invert, Tilt Feedback, Dimmer Curve, Dimmer Speed, White Balance, LED Refresh
Rate, Invert Pixel Order, Power Mode or CCT Calibration.
Tilt Invert
Tilt Feedback
Dimmer Curve
Dimmer Speed
Select Tilt Invert, press ENTER.
Use UP/DOWN button to select No (tilt invert deactivated) or Yes (tilt
invert activated), confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Tilt Feedback, press ENTER.
Use UP/DOWN button to select No (tilt feedback deactivated) or Yes (tilt
feedback activated), confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Dimmer Curve, press ENTER.
Use UP/DOWN button to select Linear, Square Law, Inv SQ Law or S
Curve, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Dimmer Speed, press ENTER.
Use UP/DOWN button to select Fast or Smooth, confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 22 -