Assembly Procedure - Hammer Strength HDW-SQST Owner's Manual

Assembly Procedure

Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Squat Stand (HDW-SQST)
Squat Stand not required to be bolted to floor due to Stability Feet.
Component List
Item
1
2
3
4
Front Crossmembers
5
6
7
8
Bar Catches and Supports
9
10
Description
Left Training Upright
86" (218 cm) or 91" (231 cm)
Right Training Upright
86" (218 cm) or 91" (231 cm)
Stability Feet
Lower Crossmember
Monkey Bar
Off-Set Bar
2x3 Crossmember
2-Handle Bar
Standard HR Bar Catch
Premium HR Bar Catch
Page 16 of 69
Qty.
1
1
4
1
1
1