Assembly Procedure - Hammer Strength HDW-SQST Owner's Manual

Assembly Procedure

Install Add-Ons
Install Band Pegs
NOTE: All racks are required to be bolted to floor if training with bands or using suspension training devices.
Install bang pegs to large holes in training uprights or crossmembers.
Install Hanging Bar Storage
Install bolts, washers, backing washers, and lock nuts securing hanging bar storage to upper crossmember using two
3/4" wrenches.
Item
1
2
Item
1
2
3
4
5
6
Tighten hardware to 20-25 ft-lb (27-34 Nm).
Page 14 of 29
Description
Band Peg
Training Upright
Description
Hanging Bar Storage
Upper Crossmember
Bolt, HHB .5 x 4.5
Lock Washer, 1/2"
Backing Washer
Lock Nut, 1/2"
Qty.
2
2
Qty.
1
1
2
2
2
2