Pullout Force
Life Fitness specifies Hilti
design pullout force (in tension) for the specified anchors, when properly installed in cracked concrete, is provided in
the side table. This table should be used for reference only; for additional and up-to-date information on the anchor
capabilities or the design pullout force in other substrates, please consult Hilti directly at https://www.us.hilti.com.
Dynamic Anchors
KB-TZ2 3/8" x 5" and HST3 10mm x 130mm
Static Anchors
HUS-H 6mm
* Design strength extracted from the Hilti
Tools Required
WARNING: Adhere to manufacturer's equipment warnings and guidelines. Follow manufacturer's instructions
for proper usage.
• 1" L-shape SDS rotary hammer
• (Imperial anchors) 3/8" diameter carbide drill bit
• (Metric anchors) 10mm diameter carbide drill bit
• Extension cord
• Floor scanner / rebar detector (optional)
• Hammer (Dynamic anchors only)
• Rotary tool
• Safety glasses
• Tape measure
• Torque wrench
• Vacuum (for debris)
™
static and dynamic anchors. According to the anchor manufacturer, the recommended
KH-EZ 1/4"
™
Anchor Fastening Technology Manual.
Item
1
2
3
Anchor Embedment into Concrete Thickness
4
Drill Depth Beyond Anchor Thickness
5
Distance of Anchor to Concrete Edge
6
Flooring (wood/tile/rubber/screed) Thickness
7
Base Plate Thickness (See Foot Dimensions)
Design Resistance in Tension *
Greater than 2,000 lb (2.7kN)
Design Resistance in Tension *
Page 66 of 69
Description
Anchor
Concrete Thickness
830 lb (3.6 kN)
3.3 kN (741lb)