Cable Handling Guide; Cable Connections, Seating, And Installation - Hammer Strength HDW-SQST Owner's Manual

7. Cable Handling Guide

Cable Connections, Seating, and Installation

Cable Connections with threaded cable ends are required to be installed and maintained following the specifications
identified below. Failure to follow these specifications can lead to the dislocation of the threaded cable during use and
can cause serious injury. Along with securing the threaded cable end and jam nut, it is important to check the entire
unit and ensure that all hardware is securely fastened and not left loose upon completion of cable installation.
WARNING: Use of non certified "techs" note: Service warranties may be void if a non-Life Fitness-certified
technician performs service work. Replacement of any strength cables should be performed by a Life Fitness
certified technician.
CABLE CONNECTIONS TYPES
Insignia selectorized strength uses a direct link cable connection.
1.
2. Cable Hangtag
3.
• Jam nuts must be tightened toward the head plate assembly and frame anchor. Torque the jam nuts to 20-25
FT-LBS (27.2 - 24.0 Nm).
• Cable Hangtags to be removed by customer only.
Cable is inserted directly into the head plate assembly.
Cable
Jam Nut
DIRECT LINK
4.
5.
Page 60 of 69
Head Plate Assembly
Weight Plates