Schedule Time-Lapse Record Mode Setup - Ganz CDR-01S User Manual

No : Confirm not to System Reset
3.5.8.4 Press Menu to exit and confirm current operation.
3.5.8.5 Press again Menu to exit and close System Setup mode.
Note: If operation without any action until 60 seconds, it will close the setup
mode.
3.6 Schedule Time-Lapse record mode setup (Timer)
3.6.1 Enter " Timer " setup
To press "MENU" to enter main menu. You will need
to enter password to access main menu. To press
"◄" "►" to move digit, and to press "▲" "▼" to
select number. To press "ENTER" button to confirm
password.
Ex.: Password : 0000 (Default : 0000)
After keying in correct password, and confirm by
pressing "ENTER" button, screen will show following
options.
Timer ------- Scheduling Record
Record ------- Record Mode Setup
Alarm ------- Alarm Mode Setup
Remote ------- Remote Control Setup
System ------- System Setup
Event -------- Event List
But Date / Time & Password setup will not be changed.
(System)
► Buzzer : On
HDD Overwrite : No
Date Display : Y- M - D
Date : 2002-JUL-14(SUN)
Time : 22:38:29
New Password : xxxx
Clear HDD : No.
System Reset : No.
Password : 0000
18
(Menu)
► Timer
Record
Alarm
Remote
System
Event