Progress Solar/Wind SLT 700 Series Operator's Manual page 8

 Multi-stage light tower that can expand from ~8' to 23' (standard size).
 Wind turbine must be housed on same mast assembly and extends ~2' above
lights
 Photocell – Activates lights in darkness when turned on
 Automated Light Timer / Charge Control Module
o Light Timer(s) to enable automated, timed interval (optional photo-sensor) or
manual lighting start/stop times (independent from solar panels)
o Maximum Power Point Tracking (MPPT) charge controller(s) to
maximize solar power gained and to prevent over or under charging of
batteries. Performance data from the charge controllers can be
downloaded. Low Voltage disconnect is used to protect batteries.
o Breakers to protect service personnel, solar wings, lights and electrical
systems
o Temperature controlled cooling fans provided
Note: LED pupil lumens (scotopic) appear brighter than (photopic) foot candle
measurements indicated when compared directly to high intensity discharge
lighting (like metal halide or high pressure sodium).
 Durable, steel vented housing customized to store, protect and maximize
functionality of power generation, power storage and light tower components
 Towing weight – ~1,600 to 3900lbs depending on model
 High Wind Stabilization Package (5 total outriggers/jacks & 4 Tele-Struts)
 Towing specifications & requirements –tongue weight - est. 120-220 lbs.
 Jack on Tow Bar
 Pintle lunette ring coupler OR optional 2" ball coupler
 Forklift guides on most units
 4 "D" rings/unit used to secure unit during transportation
 Lockable battery and storage compartment within unit housing
Light Tower & Control Module
Customized Trailer & Housing
8 | P a g e