How To Change Settings; Settings Via The Head Unit - Progress Solar/Wind SLT 700 Series Operator's Manual

Measured voltage
> 36V
Note that the battery monitor is unable to detect a 32V nominal battery voltage. If the battery monitor is used
with a 32V battery bank, the charged voltage must be set manually using the

4.3. How to change settings

4.3.1. Settings via the head unit

Use the display buttons to enter and navigate through the settings menu. Each setting has a number and a name. For example:
"01 - Battery capacity". The full list of all battery settings and their corresponding number can be found in the
settings [28] chapter.
It is also possible (and easier) to make the battery monitor settings via the VictronConnect app. See the
VictronConnect app [14]
To access the settings menu and change settings:
1 Start in the main menu.
2 Press SETUP for two seconds to enter the settings menu.
3 The first setting item 01-Battery capacity will be shown.
4 Use the + and – buttons to go to the desired setting item.
5 Press SELECT to access the setting item.
6 Use SELECT and the + and – buttons to customize the setting.
Page 13
Manual - BMV-712 Smart
chapter on how to do this.
Display
Setup
button
+ (up) and - (down)
buttons
BMV head unit display and buttons.
Assumed nominal voltage
48V
Charged voltage [29] setting.
All features and
Select
button
Configuration
The