Table of Contents
Advertisement
7
Press SETUP to return to the setting menu.
8
Go to the next setting using the + or - buttons.
After all settings have been made, press SETUP to return from the
9
settings menu to normal mode.
4.3.2. The VictronConnect app
The VictronConnect app can be used to change all settings and to update the firmware.
Ways to connect to the battery monitor:
• Locally via built-in Bluetooth.
• Locally via USB using the
VE.Direct to USB interface
• Remotely via a GX device, using VictronConnect "Remote" feature. For more information, see the
chapter in the VictronConnect app manual.
How to connect with the VictronConnect app to the battery monitor:
• Open the VictronConnect app.
• Ensure that the battery monitor is powered.
• Look for the battery monitor to appear in the device list in the "Local" or the "VRM" tab.
• Click on the battery monitor.
• In case of a connection via Bluetooth; enter the default PIN code: 000000. After entering the default PIN code, the
VictronConnect app will ask you to change the PIN code. This is to prevent unauthorized connections in the future. It is
recommended that you change the PIN code on the first installation. This can be done in the product info tab; see paragraph
Changing PIN code
[42].
To view and/or change battery monitor settings, navigate to the settings page by clicking on the cog icon
home screen.
The battery monitor monitoring and setting screens in the VictronConnect app.
Note that this manual only covers the items that are specific to the battery monitor. For more general
information about the VictronConnect app, like how to use it and where to download it, or how to connect, see
the VictronConnect app
Page 14
Manual - BMV-712 Smart
connected to the VE.Direct port.
product page
and manual.
VictronConnect-Remote
at the top right of the
Configuration
Advertisement
Chapters
Table of Contents
Troubleshooting
