Config > Time/Date; Supervisor Issues Menu; Issues > Manual; Issues > Mode - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION VII - SUPERVISOR KEY ACCESS
TIME/DATE
CONFIG >
Option C on the Configuration menu provides the opportunity to set the
time, date and day of the week settings stored in the FMU.
If the site has satellites, only the master FMU's time/date needs to be set.
Daylight savings time adjustments require time resets using this menu option.

SUPERVISOR ISSUES MENU:

With the Issues menu is selected, the supervisor may dispense fuel (similar to
manual issue key), modify hose or hoses into or out of semi-manual mode
(factory set option has wiring requirement), or take hoses out of service or return
them to service. (Hose has been shutdown. Contact Supervisor.)
MANUAL
ISSUES >
By selecting Option A on the Supervisor Issues submenu, the holder of the
supervisor key has the ability to start a Manual Issue fueling transaction at the
FMU by entering a User ID and Vehicle ID on the keypad. Five attempts to
enter an authorized User ID are provided. The Vehicle Id is not validated.
MODE
ISSUES >
ISSUES > MODE >
Semi-Manual mode is an operational setting in which one or more hoses
may be placed in semi-manual mode at a time. This option requires
TIME/DATE MENU: <time> <date> <day of week>
A=TIME, B=DATE, C=DAY OF WEEK, D=EXIT
NOTE:
* SUPERVISOR ISSUES MENU *
* A=MANUAL, B=MODE, C=PUMPS, D=EXIT *
* MODE MENU
* A=SEMI-MANUAL, B=MONITOR
SEMI-MANUAL
*
D=EXIT *
55