Config > Modify > Pumps - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION VII - SUPERVISOR KEY ACCESS
press Option B and a prompt requests the new cumulative totalizer for the
selected pump. This value is not checked for accuracy.
PUMPS
CONFIG > MODIFY >
PUMPS CONFIG: 1=INTITIAL, 2=MECH, 3=ELEC,
4=ELEC ADDR, 5=BLEND, 6=AIM IDS D=EXIT
This menu provides the opportunity to configure the system. Each
FuelMaster® unit can control up to eight hoses (A-H).
CONFIG > MODIFY > PUMPS >
Modify pump number (1-99) and pump type (mechanical or electrical)
for each hose. Press the 'A' key to scroll through each item and use
the 'B' and 'C' keys to modify the value.
CONFIG > MODIFY > PUMPS >
Modify settings for each mechanical pump. Press the 'A' key to scroll
through the settings for each pump. There must be at least one
mechanical pump configured.
PRODUCT CODE
-
TANK NUMBER
-
PULSER DIVIDE RATE
-
NO-PULSE TIMEOUT
-
PUMP FINISH TIMER
-
UNIT OF ISSUE
-
USE PUMP HANDLE
-
UNL
-
CONFIG > MODIFY > PUMPS >
Modify settings for each electric pump. Press they 'A' key to scroll
through the settings for each pump. There must be at least one
electrical pump configured.
NO-PULSE TIMOUT
-
PUMP FINISH TIMER
-
UNIT OF ISSUE
-
NO-PULSE TIMEOUT
-
PUMP FINISH TIMER
-
INITIAL
MECH
ELEC
48