Syn-Tech Systems FuelMaster Plus Operation Manual page 33

SECTION IV- TWO KEY OPERATIONS
be turned on. The prompt indicates the dispenser hose status.
When the FMU sees the pump handle turned, on it responds with the above
message and is ready to track fueling.
** PUMP HANDLE NOT TURNED OFF **
** TURN PUMP HANDLE OFF **
This prompt indicates that the FMU could not detect when the pump handle was
turned on because it was already on. Flip the pump handle off and the hose
selection re-appears. Select the hose and the prompt on the FMU display
indicates when it is ready to look for the pump handle to be turned on. When
prompted, turn the handle back on.
33