Syn-Tech Systems FuelMaster Plus Operation Manual page 11

SECTION I - VEHICLE KEY OPERATIONS
Enter the PIN (Personal Identification Number) of the Vehicle Key on the FMU
keypad. This number is assigned to the key when it is encoded and is a 4-digit
number that is unique to the key. If the entry is incorrect, an error message
appears:
The error is logged on the on-site printer and process begins again. Once
the vehicle's PIN is entered correctly, the next prompt appears.
The PIN entry is the only user entry which does not require that the
ENTER/YES key be pressed in order to complete the entry.
If the 'Odometer First' option is enabled in the FMU's configuration, the
next two prompts (User ID and Odometer) Odometer will appear first (This
option is 'disabled' by default but may be changed by contacting Syn-
Tech's Product Support personnel.)
If the USER ID option is enabled on the system, the following prompt will
appear:
This prompt requires entry of a USER ID. This may be alphanumeric and may be
up to nine characters in length. This prompt may be customized to read
something other than USER ID by contacting Syn-Tech Systems Customer
Satisfaction Center. Once the USER ID is entered on the FMU keypad, press the
ENTER/YES key to receive the next prompt.
2500 series FMUs with either COM (Commercial) or VMN system types have the
option of requiring the entry of a USER ID only on selected Vehicle Keys. Each of
***** FUELMASTER
ENTER P.I.N. ---->
***** ERROR: INVALID P.I.N. ENTERED
*** RE-INSERT KEY TO TRY AGAIN!
NOTE:
IMPORTANT NOTE:
***** FUELMASTER
ENTER USER ID --->
NOTE:
*****
*****
***
****
11