Section I - Vehicle Key Operations; Vehicle Key Fmu Configuration; Vehicle Key Operation Prompts - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION I - VEHICLE KEY OPERATIONS

SECTION I - VEHICLE KEY OPERATIONS

Vehicle Key FMU Configuration

The system types that use vehicle keys are the COM (Commercial)
systems which have one of the following key configurations: VKO (Vehicle
Key Only), Either Key or Two Key and the VMN (Verified Miscellaneous
Number) systems. (Prompts specific to Either-Key and Two-Key Systems
are detailed in Sections III & IV of this manual.)
Vehicle Key systems are designed to provide accurate fueling records as
they relate to the activities of a particular vehicle. These records may also
contain User information depending on the configuration of the unit and
the key options selected.

Vehicle Key Operation Prompts

If the Odometer/Chronometer
odometer/chronometer reading before getting out of the vehicle.
The FMU screen displays the following prompt:
This message indicates that the FMU is available for use. Insert the ProKee®
into the ProKee® receptacle. Press it in and hold it there until the display screen
on the FMU changes to the next prompt (approximately one second).
If your system is equipped with a credit card reader, the following prompt is used
instead of the prior prompt as the FMU's default prompt:
If the FMU's PIN option is enabled and the vehicle key's PIN option is set to
Y (this is done in the Central Controller software when a ProKee® is being
encoded), the following prompt will appear:
feature
** FuelMaster FUELS ACCOUNTING SYSTEM
** INSERT KEY, HOLD 1 SECOND TO BEGIN
NOTE:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY OR CARD TO BEGIN
is enabled, note
**
**
the current
**
10