Syn-Tech Systems FuelMaster Plus Operation Manual page 5

TABLE OF CONTENTS
Error Message Prompts ............................................................. 58
FMU WAS NOT ABLE TO READ KEY CONTENTS ...... 58
FMU WAS NOT ABLE TO READ KEY CONTENTS ...... 58
FMU WAS ABLE TO READ KEY CONTENTS ............... 58
FMU WAS ABLE TO READ KEY CONTENTS ............... 58
FMU COULD NOT WRITE
ODOMETER/CHRONOMETER BACK TO KEY ............. 59
FMU COULD NOT WRITE P.M. BACK TO KEY ............ 59
ODOMETER/CHRONOMETER ENTERED ON THE FMU
KEYPAD IS LOWER OR HIGHER THAN THE
PREVIOUS VALUE AND RANGE CALCULATION....... 59
TWO CONSECUTIVE INVALID ODOMETER ENTRIES
CAUSED TRANSACTION CANCELLATION ................. 59
HOSE IS UNAVAILABLE FOR USE ................................. 60
WHILE DOING SELF-TEST DURING POWER-UP, FMU
MISREAD SITE CONFIGURATION STORED IN
EEPROM .............................................................................. 61
INITIALIZE USING OLD OR NEW? YES/NEW, NO/OLD
............................................................................................... 61
TEST SELECTED CANNOT GAIN ACCESS TO HOSES 62
POWER FAIL TEST FAILED ............................................. 62
SELECTED OPERATION CANNOT GAIN ACCESS TO
RESOURCES CURRENTLY PERFORMING
COMMUNICATIONS ......................................................... 62
USER ID/VEHICLE ID CANNOT BE VERIFIED ............. 62
FMU HARDWARE FAILURE!! ......................................... 62
5