Section Iii- Either Key Operations; Either Key Fmu Configuration; Either Key System Procedures - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION III- EITHER KEY OPERATIONS

SECTION III- EITHER KEY OPERATIONS

Either Key FMU Configuration

This system type supports the use of either a Vehicle Key or a User Key.
Either Key systems are designed to provide the flexibility of Vehicle Key or User
Key fueling. Fueling transaction accounting in this type of system is dependent
upon the type of key inserted. Although both User Keys and Vehicle Keys are
supported by this system type, only one is required at the time of fueling.

Either Key System Procedures

If the odometer/chronometer feature is active, note the current
odometer/ chronometer reading before getting out of the vehicle.
The FMU display screen displays the following prompts:
This message indicates that the FMU is available for use. Insert the ProKee®
into the ProKee® receptacle. Press it in and hold it there until the display screen
on the FMU changes to the next prompt (approximately one second).
If your system is equipped with a credit card reader, the following prompt is used
instead of the prior prompt as the FMU's default prompt:
If the PIN option is enabled and the key's PIN option is set to Y (this is done in
the software when ProKee® is being encoded) the following prompt will appear:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY, HOLD 1 SECOND TO BEGIN **
NOTE:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY OR CARD TO BEGIN **
***** FUELMASTER *****
ENTER P.I.N. --->
21