Syn-Tech Systems FuelMaster Plus Operation Manual page 18

SECTION II- USER KEY OPERATIONS
Enter the PIN (Personal Identification Number) of the User Key on the
FMU keypad. This number is assigned to the key when it is encoded and
is a 4-digit number that is unique to the key. If the entry is incorrect, an
error message appears, the error is logged on the on-site printer and the
process begins again. Once the PIN is entered correctly, the next prompt
appears.
The PIN entry is the only user entry which does not require that the
ENTER/YES key be pressed in order to complete the entry.
If the 'Odometer First' option is enabled in the FMU's configuration, one of
the next two prompts (User ID and Odometer) Odometer will appear first
(This option is 'disabled' by default but may be changed by contacting
Syn-Tech's Product Support personnel.)
If the VEHICLE ID option is enabled, the following prompt appears:
On the FMU keypad, enter the VEHICLE ID of the vehicle being fueled.
No verification occurs on the VEHICLE ID entered.
If the ODOMETER/CHRONOMETER option is enabled for this User Key,
the following prompt appears:
***** FUELMASTER *****
ENTER P.I.N. --->
NOTE:
IMPORTANT NOTE:
***** FUELMASTER *****
ENTER VEHICLE ID --->
***** FUELMASTER *****
ENTER CHRONO/ODOMETER --->
18