Aim > Reset; Supervisor Config Menu; Config > Modify; Config > Modify > Comm - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION VII - SUPERVISOR KEY ACCESS
RESET
AIM >
This option resets the AIM unit provided the programming hose tag is
inserted.

SUPERVISOR CONFIG MENU

MODIFY
CONFIG >
By selecting Option A, Modify from the Configuration submenu, the following
menu appears:
CONFIG > MODIFY >
By selecting Option 1 of the Modify Configuration submenu, the following
submenu appears:
COMMUNICATIONS MENU:
A=BAUD RATE, D=EXIT
If a Network Interface Card is installed on the main board of the
FuelMaster®, an additional "Network Card" option will appear in the
Communications Menu.
COMMUNICATIONS MENU:
A=BAUD RATE, B=NETWORK CARD, D=EXIT
CONFIG > MODIFY > COMM >
The Tank Monitor Unit, receipt printer, and modem baud rates may be
changed by first selecting the device to modify and then pressing 'A' on
the keypad to scroll through the baud rate selections. Once a baud rate
CONFIGURATION: <TIME> <DATE> <DAY OF WK>
A=MODIFY, B=TESTS, C=TIME/DATE, D=EXIT
CONFIG MENU: 1=COMM, 2=TOTALIZERS
A=PUMPS, B=SYSTEM, C=SHOW OPTIONS, D=EXIT
COMM
NOTE:
BAUD RATE
BAUD RATE MENU: 1 = TANK MONITOR UNIT,
2 = RECEIPT PRINTER, 3 = MODEM, D = EXIT
46