User Key Specific System Procedures - Syn-Tech Systems FuelMaster Plus Operation Manual

SECTION III- EITHER KEY OPERATIONS
If the Preventive Maintenance option is enabled, the following prompt appears:
This message indicates that the PM MILEAGE encoded on the key has been
reached, and preventive maintenance is due. This message continues to be
displayed for this vehicle until the Vehicle Key is updated (PM MILEAGE is reset)
by the supervisor. (This message is displayed for the time period specified in the
Configuration Setting, 'Message Read Duration'. The default for this setting is 4
seconds.)

USER KEY SPECIFIC SYSTEM PROCEDURES

If the VEHICLE ID option is enabled for the key, the following
prompt appears:
This prompt requires entry of an eight- character Vehicle ID and the
ENTER/YES key to complete the entry. The Vehicle ID entry is accepted
without validation.
If the ODOMETER/CHRONOMETER option is enabled for this User Key,
the following prompt is displayed:
Enter the mileage or hours of the vehicle on the FMU keypad. Once
entered, press the ENTER/YES on the keypad. Unlike when using the
Vehicle Key, no checking is done on the miles/hours entry; it is recorded
with the transaction.
If the Oil Check option is enabled on the unit, the following prompt
appears:
** VEHICLE IS DUE FOR PREVENTATIVE **
** MAINTENANCE -- INFORM SUPERVISOR **
***** FUELMASTER *****
ENTER VEHICLE ID --->
***** FUELMASTER *****
ENTER CHRONO/ODOMETER --->
***** FUELMASTER *****
DID YOU CHECK YOUR OIL? (Y/N) --->
25