7. Platen Upper Roller
1) Remove the reading upper roller.
(Page 3-14)
2) While holding the platen upper roller
push the claw (marked arrow) of the right
and left bearing holders from the inside
with a tool with a thin tip, and remove the
platen upper roller unit.
Figure 3-316
COPYRIGHT © CANON ELECTRONICS INC. 2018
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3) For the platen upper roller unit
2 E-rings
the bearing holders
1
,
gear
Note: Since the pin may be detached, do not
lose it.
Note: Refer to "Pull-in upper roller" for details
precautions.
(Page 3-12)
CANON DR-G2140/G2110/G2090 FIRST EDITION
2
(1 on both sides) and remove
3
4
5
and pin
on the left side.
Figure 3-317
1
, remove
. And remove
3-15