Rear Cover - Canon imageFORMULA DR-G2140 Service Manual

9. Rear Cover

1) Remove the control PCB cover.
(Page 3-3)
2) Remove all connectors connected to the

control PCB 1
. And remove 3 locked ca-

2
ble bands then remove the cables
from the cable holder
Note: Unlock 3 locked connectors and then
remove them.
Figure 3-219
3) Remove 7 screws
tip). And remove the mounting plate
(with control PCB) from bottom side, and

unhook the hook
Figure 3-220
COPYRIGHT © CANON ELECTRONICS INC. 2018

3
while opened.

1
(M3-TP head, round
on the upper right.
3
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4) Remove 2 screws
round tip). Rotate the upper side of the
rear cover
hooking 2 pairs of the lower fitting parts
remove the rear cover.
 Notes on assembling
Be sure not to break the lower hooks.

2

1 (M3-TP head,

2 to the front and while un-
Figure 3-221

3 ,
3-9