Figure 3-503
Notes on assembling
The cables connected to the CIS unit
should be formed with extra because the
CIS unit slides to get shading data.
Connect 2 cables to the CIS unit, and then
insert the cable band with lock. And
placed these cables in the groove of
sponge packing and then assemble the
cover.
Pass the motor, grounding and sensor ca-
bles through a hole before assembling the
reading unit. Be careful not to allow these
cables to be caught.
COPYRIGHT © CANON ELECTRONICS INC. 2018
CHAPTER 3 DISASSEMBLY & REASSEMBLY
2. Shading Motor
1) Remove the upper reading unit.
(Page 3-24)
2) Remove 2 screws
round tip) and remove the shading mo-
tor
CANON DR-G2140/G2110/G2090 FIRST EDITION
1
2
.
Figure 3-504
(M3-bind head,
3-25