Network - Canon imageFORMULA DR-G2140 Service Manual

H. Network
This is used to check and set the network
settings.
Figure 5-278
 DHCP
Display and set the setting of DHCP. If you
get the IP address automatically using
DHCP, turn it ON.
 IP Address
Display the IP Address. When the DHCP
setting is OFF, you can set it.
 Subnet Mask
Display the subnet mask. When the DHCP
setting is OFF, you can set it.
 Default Gateway
Display the default gateway. When the
DHCP setting is OFF, you can set it.
 Mac Address
Display the Mac address of this main body.
Note: The "Mac Address" cannot changed in
the market.
Note: When you change the network settings,
you have to inform to user.
COPYRIGHT © CANON ELECTRONICS INC. 2018 CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
5-39