Canon imageFORMULA DR-G2140 Service Manual page 141

No. Component/display name
31 SD Card
32 USB 3.1
33 Imprinter Door
34 Others
35 Firmware
36 Firmware version
37 Version up (upper one)
38 Registered firmware
39 Version up (middle one)
40 Network firmware
41 Version up (lower one)
42 Analog
43 (name of each sensor)
44 Write file
45 Scan test
46 Image 1
47 Image 2
48 Zoom (Image 1)
49 Zoom (Image 2)
50 Scan test
51 Imprinter
52 Imprinter Busy
53 Imprinter Head
54 Imprinter Voltage Error
55 Flush Count
56 Cumulative Count
57 Edit
58 Cancel
59 Apply
COPYRIGHT © CANON ELECTRONICS INC. 2018
Check the connection of the SD card.
Check the communication with USB Supper Speed.
Check the imprinter door sensor.
Check the exit sensor, double feed sensor, tray
home sensor, door sensor and others.
Display the current firmware version.
Update from unregistered firmware.
Display and select the registered firmware.
Update from registered firmware.
------
Update the network related firmware with the bin
format only.
Display each value of analog data.
Save the above information on the text file.
Display the scanned image (the second last one).
Display the scanned image (the last one).
Enlarge the image 1.
Enlarge the image 2.
Move the scanning screen and execute.
Check the operation of the imprinter.
Check the detection of the imprinter head.
Check the applied voltage to the imprinter.
Display the ink flushing count at once.
Display the total flush counts.
Change the value for the counts above.
Cancel the changed value.
Save the changed value.
Table 5-201b
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Function
5-7