Application Information; Simulation Mode - Canon imageFORMULA DR-G2140 Service Manual

4. Application Information

This mode is used to check the detailed
version of the service mode software (EXE
file).
Select [Help] from the toolbar at the top of
the screen and then select [Application infor-
mation].
Figure 5-209
COPYRIGHT © CANON ELECTRONICS INC. 2018

5. Simulation Mode

This mode is used to train service techni-
cians about service mode without connecting
to the scanner.
 Operation Procedure
1) Enter the 8 characters "training" as the
password.
2) The screen is the same as in the real pro-
cedure, and can be operated in the same
way except for some buttons that are
grayed out.
Note: You cannot execute operations that re-
quire communication with the scanner.
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Figure 5-210
5-11