Lower Registration Roller; Registration Shutter - Canon LBP-1000 Service Manual

F. Lower Registration Roller
1) Remove the registration roller unit
according to the steps 1) through 3) on
page 3-8.
2) Remove the 3 springs, and then sepa-
rate the upper registration roller unit
from the registration roller unit.
Springs
Upper registration roller unit
Figure 3-4-7
3) Remove the 2 bushings, gear, and then
the lower registration roller.
Bushings
Gear

Lower registration roller

Figure 3-4-8
G. Registration Shutter
1) Remove the registration roller unit
according to the steps 1) through 3) on
page 3-8.
2) Separate the upper registration roller
unit from the registration roller unit.
3) Remove the 2 bushings from the upper
registration roller unit, and then pull
the shaft to the right to remove.
Remove the registration shutter.
Bushings
Shaft

Registration shutter

Figure 3-4-9
< Note for reassembly >
When attaching the registration shutter to
the shaft, be sure to set the spring secure-
ly.
CHAPTER 3
3 - 13