TOHATSU MFS 40A Owner's Manual page 56

56
ENGINE OPERATION
2. Operate the Power Trim & Tilt switch
and tilt the outboard motor down
until the motor touches to the thrust
rod.
UP
DN
UP
DN
7
1
1. Tilt stopper
The outboard motor can also be tilted up
and down using the switch provided on
the bottom cowl.
ENOF00067-2
It is possible to tilt up or down whether or
not the main switch is "ON" or "OFF".
ENOM00940-1
Manual relief valve
If the battery is dead, and/or the power
ENOF00941-0
tilt switch is inoperative open the manual
UP
DN
valve completely in the Manual direction.
This allows the outboard motor to be
tilted manually.
ENOW00872-1
ENOF02437-0
Make sure the manual relief valve is closed
before operating the outboard motor. If the
manual relief valve is not closed, the out-
board motor will be tilted up when shifting in
reverse.
ENOF00889-0
ENOW00873-1
Before opening the manual relief valve, make
sure nobody is under the outboard motor. If
the outboard motor is in the tilted upposi-
tion with the manual relief valve loosend, the
outboard motor will be tilted down suddenly.
ENOF00891-B
WARNING
WARNING