TOHATSU MFS 40A Owner's Manual page 42

42
ENGINE OPERATION
6. Make sure that water is being dis-
charged from the cooling water check
port.
ENOM00974-A
Top mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
7
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position. Do not use the Neutral
throttle button to open the throttle
when starting the engine.
7
4
ENOF00868-0
1. Forward (F)
2. Neutral (N)
3. Reverse (R)
4. Fully opened (Forward)
5. Fully opened (Reverse)
6. Neutral throttle button
7. Control lever
8. Neutral lock arm
4. Turn the main switch key to ON posi-
tion and confirm three warning lamps
light up with buzzer sound and then
go off.
1
ENOF00936-1
1
1. Warning lamp
5. Turn the main switch key to START
position and release the key when the
engine has started. The key returns to
ENOF02409-0
the original position, automatically.
7
2
1
N 3
6
8
F
N
5
R
ENOF00937-0
1
ENOF00851-A